1. Home
  2. Service Check Reference
  3. HP ILO System HW Status Check

HP ILO System HW Status Check

Object Type: Service Check

Service Check Category: HP Insight Manager Agent Checks

Passive: No

Description: This service check monitors the hardware status of a an HP iLO module (with an option to specify the IP address of the iLO card instead of the address of the device configured).

The OIDs fetched from hp_system_mib are listed below:

  • Drive Array Spare Status: .1.3.6.1.4.1.232.3.2.4.1.1.3
  • Logical Drive Status: .1.3.6.1.4.1.232.3.2.3.1.1.4
  • Physical Drive Status: .1.3.6.1.4.1.232.3.2.5.1.1.6
  • Temperature: .1.3.6.1.4.1.232.6.2.6.3.0
  • System Fan: .1.3.6.1.4.1.232.6.2.6.4.0
  • CPU Fan: .1.3.6.1.4.1.232.6.2.6.5.0
  • Power Supply State: .1.3.6.1.4.1.232.6.2.9.3.1.5
  • Memory Module State: .1.3.6.1.4.1.232.6.2.14.11.1.5
  • Power Supply Redundancy: 1.3.6.1.4.1.232.6.2.9.3.1.9
  • Physical Drive Condition: .1.3.6.1.4.1.232.3.2.5.1.1.37
  • Power supply Condition: 1.3.6.1.4.1.232.6.2.9.1.0
  • Fan Condition: 1.3.6.1.4.1.232.6.2.6.7.1.9
  • Memory Condition: 1.3.6.1.4.1.232.6.2.14.4

 

Fields:
DESCRIPTION
(Required) This field specifies a name for this check. The name entered must be unique among service check names on the host it is added to (the name may used again only on a different host). It is used to identify this specific check from among other service checks added to the same host.

ILO IP Address
(Optional) Specifies the IP address of the iLO card instead of the address of the device configured.

Updated on November 22, 2019

Was this article helpful?

Need Support?
Can’t find the answer you’re looking for? Don’t worry we’re here to help!
Contact Support

Leave a Reply